| UOM | EA | Seal Material | Nitrile |
| Maximum Inlet Pressure Rating | 5000 PSI, 350 BAR | Configuration | Floating Center |
| Override Functionality | Non-Detented | Flow Rate | 1, 1.4 GAL/MIN, 4, 5.3 L/MIN |
| Maximum Tank Pressure | 3000 psi | Maximum Inlet Pressure Rating | 5000 psi |
| Function | Proportional Directional Control | Power Consumption | 14, 19 W |
| Response Time | 50 ms | Minimum Operating Temperature | -34 °C |
| Current | 1.15 @ 12 VDC, 1.58 @ 12 VDC, 0.58 @ 24 VDC, 0.79 @ 24 VDC A | Cavity Size | C08-4 |
| Override Functionality | Non-Detented | Variation of Opening Point | 25% - 30% of Input Signal |
| Flow Rate | 4, 5.3 L/min | Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) |
| Actuation Type | Electrical, Manual | Operating Temperature | -30 to +250 °F |
| Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 | Maximum Operating Pressure | 350 bar |
| Configuration | Floating Center | Coil Nut Tightening Torque | 3 lb-ft |
| Body Material | N/A | Flow Rate Accuracy | +/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator |
| Division | Hydraulic Systems Division | Weight | 0.34 lb |
| Operation Type | Solenoid operated, Manually operated | Installation Torque | 22 lb-ft |
| Frequency | 100-400 Hz | Coil Type | 1/2" Super Coil |
| Maximum Operating Temperature | +121 °C | Leak Rate | 10 @ 3000 PSI (210 BAR) cm3/min |
| Hysteresis | Less than 6% | For Fluid Type | Mineral-based or synthetic hydraulic fluids |
| Maximum Flow Rate | 4, 5.3 L/min | Valve Material | All parts steel. All operating parts hardened steel |
| Seal Material | Nitrile | | |
