Browse Categories
Fluid Connectors/Brass and DOT
Return to previous page

Parker E-43-0100 0.17" ID 1/4" OD 30.0 M L Tubing

POLYETHYLENE TUBING
POLYETHYLENE TUBING
POLYETHYLENE TUBING
Item #: E-43-0100

Product Info

Parker Hannifin

PE tubing is produced from a high molecular weight resin to provide increased dimensional stability, uniformity and long-term strength. Parker PE tubing meets the FDA and NSF-51 requirements for food contact applications and NSF-61 for potable water.The tubing may be used in general-purpose instrument applications as well as all food handling applications except holding food during cooking. The black tubing, EB series, contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high, ultraviolet light sources.Standard black is not approved for food handling applications, but NSF-listed and FDA-compliant black can be ordered on special request. A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur.Markets

  • Water Market
  • Food & Beverage
  • Fluid Handling
  • Industrial Pneumatics
  • Chemical transferFeatures
  • Made from 100% virgin resin material for long term strength
  • ASTM D-1693 (10% IGEPAL) For excellent stress crack resistance maximizes the service life
  • UV stabilized to reduce fading, cracking and loss of strength from sunlight
  • Meets FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water

    Applications:

  • Potable water
  • Beverage dispensers
  • Chemical transfer
  • Low pressure pneumatics

    Certifications/Compliance:

  • FDA compliant for food contact
  • ASTM D-1693 (10% IGEPAL) for stress crack resistance
  • ASTM D-1248, Type I, Class A, Category 4, Grade E5
  • NSF – 51
  • NSF – 61Notes:
  • Qualified with fittings from Parker Fluid System Connectors Division (See PFD Catalog CAT. 4660 or FSC Catalog CAT3501E USA for specific fittings)
  • Black (EB) tubing contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high ultraviolet light source
  • A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure
  • Wall thickness is for reference only

    • Item Specifications

    • Natural
    • 0.17 Inch 4.3 MM
    • 30.0 M 100 ft
    • Polyethylene
    • 0.083 MPa 8.3 Bar 120 psi
    • 150 °F 66 °C
    • Air, Potable Water, Water
    • 1 Inch 25 MM
    • 0.331 MPa 480 psi 33.1 Bar
    • -62 °C -80 °F
    • 1/4 Inch 6.4 MM
    • Tubing
    • Fluid Connector
    • 0.04 Inch 1 MM
    • 0.011 LB/ft
    • 0.01 lbs per

    $0.38 /FT
    IN STOCK*
    QTY:

    Have Questions?

    Ask our experts:
    (800) 234-1041