Parker D1VW001MNJWI1N Directional Control Valve

Parker’s direct operated directional control valve series D1VW with inductive position control in NG06 (CETOP 03 / NFPA D03) features low energy losses due to optimized flow passages. It offers high functional limits up to 80 l/min and a maximum pressure of 350 bar.

This on/off valve is typically used in safety relevant applications. It complies with the machinery directive 2006/42/EG for use as clamping valve according to EN 201:2010. The start or the end position can be monitored. The position control is available for single and double solenoid valves.

Features:

• High functional limits – low forces resulting in safe operation also at high flow rates
• Low pressure drop – resulting in low energy losses in operation
• Wide product offering – many different options – all valves from one single source
• Short delivery time – no warehousing necessary

Applications:

• All types of safety relevant

Applications:

• Injection molding (safety component according to machinery directive 2006/42/EG)
  
  Attention:
  
  The adjustment of the position control is factory set and sealed. Replacement and repairs can only be undertaken by Parker.
  
  The fail-safe position of the directional valve during power failure is the spring offset or center position.

Markets: