Parker D1VW001KNJWI1N Directional Control Valve
Item #:
D1VW001KNJWI1N
Product Info
Parker Hannifin
Parker’s direct operated directional control valve series D1VW with inductive position control in NG06 (CETOP 03 / NFPA D03) features low energy losses due to optimized flow passages. It offers high functional limits up to 80 l/min and a maximum pressure of 350 bar.
This on/off valve is typically used in safety relevant applications. It complies with the machinery directive 2006/42/EG for use as clamping valve according to EN 201:2010. The start or the end position can be monitored. The position control is available for single and double solenoid valves.
Features:
- High functional limits – low forces resulting in safe operation also at high flow rates
- Low pressure drop – resulting in low energy losses in operation
- Wide product offering – many different options – all valves from one single source
- Short delivery time – no warehousing necessary
Applications:
- All types of safety relevant
Applications:
- Injection molding (safety component according to machinery directive 2006/42/EG)
Attention:
The adjustment of the position control is factory set and sealed. Replacement and repairs can only be undertaken by Parker.
The fail-safe position of the directional valve during power failure is the spring offset or center position.
Markets:
| Industrial | MoldingItem Specifications
-
24 VDC
-
Hydraulic Valve
-
Hydraulic
-
End Position Monitored Side A
-
NBR
-
With Manual Override
-
1
-
2 Positions, Spring Offset In Position 0, Operated In Position B