Browse Categories
Fluid Connectors/Brass and DOT
Return to previous page

Parker HS1.3FEP5/8-NC48.000 4 ft L FEP Tubing

FEP HS 5/8" ID 1.3:1 4 FT
FEP HS 5/8" ID 1.3:1 4 FT
FEP HS 5/8" ID 1.3:1 4 FT
Item #: HS1.3FEP5/8-NC48.000

Product Info

Parker Hannifin

FEP Heat Shrink Tubing is easier to shrink than PTFE and operates as high as 400°F (204°C). It is supplied in an expanded state to allow easy slippage over medical instruments, thermometers, lighting fixtures and other instruments where protection is needed. As a protective cover, FEP Shrink eliminates dirt and dust build up and adds lubricity to components. Did you know that Parker offers turnkey services for Fluoropolymer Heat Shrink? Even on very difficult applications, such as copper coils, using Parker as an outsource resource for custom applying of heat shrinkable tubing eliminates kinking, wrinkles and ensures consistency every time. In addition, outsourcing reduces scrap and allows you to use the product immediately upon receipt without using additional space in your warehouse for carrying inventory. Specialty heat shrink is available in PFA and ETFE. All heat shrink products can be supplied with etch on the inside diameter, outside diameter or both for bonding. In addition, laser marking is available for identification purposes.

Features:

  • 1:3/1 shrink ratio and 1:67/1 shrink ratio
  • Exceptional heat resistance up to 400°F (204°C)
  • Chemically inert to nearly all industrial chemicals and solvents
  • Superior dielectric strength
  • Low coefficient of friction eliminates dirt and dust build up
  • Long continuous lengths can be produced for electronic and cabling operations
  • Self-extinguishing
  • Non-wetting
  • Turnkey services available for custom shrinking, etching and laser marking

    Applications:

  • Protective covering for components
  • Electrical insulation
  • Rollers
  • UV light Covering
  • Medical instruments
  • Catheter constructions
  • Bulb protection
  • Battery packs

    Certifications/Compliance:

  • ASTM D2902 Type II
  • ASTM D3296-03
  • FDA Compliant
  • USP Class VI Compliant
  • RoHs

    Technical Specifications:

  • Tubing produced from virgin FEP (Fluorinated Ethylene Propylene)
  • Recovered wall thickness is nominal
  • Supplied in 4 foot lengths, coils are available as a custom run
  • Shrink Temperature: 1” Dia. and below – 410°F/210°C, Over 1” Dia. – 430°F/221°C
  • Translucent, colors available as custom run

    • Markets:

    Industrial | Government | Electrical | Medical | Marine

    Item Specifications

    • Natural
    • 4 ft
    • FEP
    • 204 °C 400 °F
    • Wiring, Chemicals, Medical Devices
    • 0.83 Inch 21.1 MM
    • -100 °F -75 °C
    • Tubing
    • Fluid Connector
    • 0.637 Inch 16.2 MM
    • 0.64 Inch 0.025 Inch
    • Heat Shrink

    $17.59 /FT
    NOT IN STOCK*
    QTY:

    Have Questions?

    Ask our experts:
    (800) 234-1041