| UOM | EA | Seal Material | Nitrile |
| Flow Rate | 5 GAL/MIN, 19 L/MIN | Actuation Type | Electrical |
| Configuration | Normally Open, Pressure Compensated | Installation Torque | 27 Nm |
| Weight | 0.17 lb | Operation Type | Solenoid operated |
| Division | Hydraulic Systems Division | Flow Rate Accuracy | +/- 7% |
| Body Material | N/A | Coil Nut Tightening Torque | 3 lb-ft |
| Maximum Operating Pressure | 3000 psi | Configuration | Normally Open, Pressure Compensated |
| Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 | Actuation Type | Electrical |
| Operating Temperature | -34 to +121 °C | Seal Material | Nitrile |
| Valve Material | All parts steel. All operating parts hardened steel | Maximum Flow Rate | 5.0 Gal/min |
| Minimum Pressure Differential | 300 psi | Leak Rate | 570 @ 3000 PSI (210 BAR) cm3/min |
| Hysteresis | < 3% | Maximum Operating Temperature | +121 °C |
| For Fluid Type | Mineral-based or synthetic hydraulic fluids | Connection Type | N/A |
| Frequency | 100-400 Hz | Division | Hydraulic Cartridge Systems Division |
| Coil Type | 1/2" Super Coil High Watt (CCP) | Flow Direction | Top to Side (3 - 2) |
| Power Consumption | 19 W | Wire Mesh Screen Included | No |
| Variation of Closing Point | 75% of Input Signal | Maximum Inlet Pressure Rating | 210 bar |
| Function | Proportional Flow Control/Regulator | Connection Size | N/A |
| Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) | Variation of Opening Point | N/A |
| Flow Rate | 5 Gal/min | Cavity Size | C08-3 |
| Minimum Operating Temperature | -30 °F | Override Functionality | N/A |
| Current | Max: 1.58 @ 12 VDC, 0.79 @ 24 VDC A | | |
